AudioRoundTable.com: Source

Home » Audio » Source » Variac

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Variac [message #86984]

Fri, 12 January 2018 09:50

johnnycamp5
Messages: 354
Registered: June 2015
Location: NJ

Grand Master

Does this seem like a good little auto transformer?-

http://www.iseincstore.com/3pn1010bvariabletransformer120vacsinglephaseinput0-140vacoutput10acasedmodelwithcordplugreceptaclelightedswitchandfuse.aspx

I believe it is American made.

Report message to a moderator

Re: Variac [message #86985 is a reply to message #86984]

Fri, 12 January 2018 10:02

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

That's a Staco unit, and it's a good product. We used those on the bench at electronics classes back in school. Staco is an American company and have been around for decades.

You might check to see if Digikey has them, 'cause they're usually really competitive on price.

Report message to a moderator

Re: Variac [message #86986 is a reply to message #86984]

Fri, 12 January 2018 10:05

johnnycamp5
Messages: 354
Registered: June 2015
Location: NJ

Grand Master

Your right Wayne-

https://www.digikey.com/product-detail/en/staco-energy-products-company/3PN1010B/452-1003-ND/526078?utm_adgroup=Test%20&%20Measurement

Thanks.

Report message to a moderator

Re: Variac [message #86991 is a reply to message #86986]

Fri, 12 January 2018 16:08

gofar99
Messages: 1949
Registered: May 2010
Location: Southern Arizona

Illuminati (5th Degree)

Ouch, $400+. If you can get by with 5 amps instead of 10 then the one in the link below is just fine.

https://www.ebay.com/itm/TDGC-0-5KM-500VA-Variable-Output-AC-Convertor-/152215213803

I use it both on the bench and to control a crock pot. Works fine.

Good Listening
Bruce

Report message to a moderator

Re: Variac [message #86992 is a reply to message #86984]

Fri, 12 January 2018 16:49

johnnycamp5
Messages: 354
Registered: June 2015
Location: NJ

Grand Master

Yes the Chinese one are much cheaper.

Report message to a moderator

Re: Variac [message #87096 is a reply to message #86984]

Sun, 21 January 2018 09:54

johnnycamp5
Messages: 354
Registered: June 2015
Location: NJ

Grand Master

I ended up getting this one used on Ebay for $131.-

index.php?t=getfile&id=2050&private=0

You can't tell from the crummy i-phone pic, but it appears gently used, and the knob turns nice and smooth.
Seems built like a tank.

I checked it with one of my cheap ass meters lol.

Plugged into an outlet (which reads 125.9V) at my workstation, it measures as follows-

Set at output 0-120V, it maxes out at 125.2V.
Set at output 0-140V, it maxes out at 151V.