AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » Today's Puzzler

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Today's Puzzler [message #8682 is a reply to message #8680]

Thu, 13 January 2005 06:13

TubeCraft
Messages: 30
Registered: May 2009

Baron

Thanks Damir,
I'm going to put a breadboard together with a new socket and see what happens - I'm getting a good 5v rms @ 100hz signal downstream of the entire input section, but you're right, the only way to crack this nut is to simplify until I get a good result, then add on one piece at a time...

Report message to a moderator

[Message index]

		Today's Puzzler By: TubeCraft on Wed, 12 January 2005 12:52
		Do you have grid stoppers? By: BrownEyes on Wed, 12 January 2005 13:27
		Re: Do you have grid stoppers? By: TubeCraft on Wed, 12 January 2005 13:45
		Grid stoppers- No change By: TubeCraft on Thu, 13 January 2005 06:07
		Re: Today's Puzzler By: Damir on Thu, 13 January 2005 06:06
		Re: Today's Puzzler By: TubeCraft on Thu, 13 January 2005 06:13
		Re: Today's Puzzler By: colinhester on Thu, 13 January 2005 17:54
		Re: Today's Puzzler - Solved By: TubeCraft on Sat, 15 January 2005 19:22
		I do love the "solved" posts By: PakProtector on Tue, 18 January 2005 09:20
		Re: Here's the why! By: TubeCraft on Wed, 19 January 2005 10:08
		test first... By: PakProtector on Wed, 19 January 2005 12:02

Previous Topic:	Bypassing Caps
Next Topic:	Do You Know Which Is The Best 845 Tube?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 18:54:27 CST 2024