AudioRoundTable.com: Speaker » Mono "flanking sub"

Home » Audio » Speaker » Mono "flanking sub"

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Mono "flanking sub" [message #83033 is a reply to message #81624]

Sat, 16 July 2016 11:48

johnnycamp5
Messages: 354
Registered: June 2015
Location: NJ

Grand Master

Wow.......
page 7 of this thread is a great bit of info.

Ive been wondering about "delay" for the flanking subs as well, but Wayne confirmed my thoughts, with using "positioning".

I see a ton of home theater guys (example AVS forums) use electronic delay as if there is no question about it.

Why would anyone use electronic delay, especially when it only corrects in one plane (depth)?
Perhaps if you cannot adjust your mains from your subs in depth (all the same distance from the front wall), but can have the subs positioned next to (left or right) and lower than the mains, it can be of use?

Ive always felt that electronic delay, used incorrectly, might be as bad as room eq.
We all know what room correction eq does Shocked

Ive seen some stereo mains (typical tower speaker) designed in such a way that the bottom of the front baffle is out in the room more than the top (in other words, a tapered cabinet that is deeper in depth at the bottom than the top).

I understand this is to place the woofer/woofers out closer to the listeners, as to correct for the slight delay in timing/phase between the bottom woofers, mid range, and top tweeters.

If this line of thinking has merit, wouldn't this lead us to believe that placing the flanking subs out in front of the mains, closer to the listeners, with the mains being backed up against the walls might be another way of positioning?

The only thing I can think of is, the mains should be toed in, therefore generally positioning the mains out in the room more than normal, suggesting you put the subs against the front wall.

Report message to a moderator

[Message index]

		Mono "flanking sub" By: jonone on Sat, 24 October 2015 05:50
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 25 October 2015 15:20
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 08:14
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 26 October 2015 08:44
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 12:05
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 15:06
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 27 October 2015 13:23
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 27 October 2015 18:14
		Re: Mono "flanking sub" By: jonone on Thu, 29 October 2015 04:10
		Re: Mono "flanking sub" By: johnnycamp5 on Thu, 29 October 2015 11:24
		Re: Mono "flanking sub" By: jonone on Thu, 29 October 2015 14:23
		Re: Mono "flanking sub" By: johnnycamp5 on Fri, 30 October 2015 05:10
		Re: Mono "flanking sub" By: jonone on Fri, 30 October 2015 05:17
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 30 October 2015 16:37
		Re: Mono "flanking sub" By: johnnycamp5 on Fri, 30 October 2015 17:58
		Re: Mono "flanking sub" By: jonone on Sat, 31 October 2015 13:21
		Re: Mono "flanking sub" By: Wayne Parham on Sat, 31 October 2015 15:37
		Re: Mono "flanking sub" By: jonone on Sun, 08 November 2015 13:52
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 09 November 2015 12:57
		Re: Mono "flanking sub" By: jonone on Mon, 09 November 2015 14:44
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 09 November 2015 21:14
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 14:06
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 10 November 2015 14:43
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 15:21
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 16:21
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 11 November 2015 14:16
		Re: Mono "flanking sub" By: jonone on Wed, 11 November 2015 14:38
		Re: Mono "flanking sub" By: jonone on Tue, 24 November 2015 11:01
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 24 November 2015 12:46
		Re: Mono "flanking sub" By: jonone on Tue, 24 November 2015 14:01
		Re: Mono "flanking sub" By: jonone on Wed, 25 November 2015 16:12
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 25 November 2015 18:08
		Re: Mono "flanking sub" By: jonone on Thu, 26 November 2015 02:58
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 27 November 2015 16:23
		Re: Mono "flanking sub" By: jonone on Sat, 28 November 2015 11:29
		Re: Mono "flanking sub" By: jonone on Sun, 29 November 2015 14:41
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 30 November 2015 10:31
		Re: Mono "flanking sub" By: jonone on Mon, 30 November 2015 12:27
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 01 December 2015 12:01
		Re: Mono "flanking sub" By: jonone on Tue, 01 December 2015 16:05
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 01 December 2015 20:10
		Re: Mono "flanking sub" By: jonone on Wed, 02 December 2015 02:58
		Re: Mono "flanking sub" By: johnnycamp5 on Wed, 02 December 2015 05:19
		Re: Mono "flanking sub" By: jonone on Wed, 02 December 2015 07:07
		Re: Mono "flanking sub" By: jonone on Sat, 05 December 2015 08:27
		Re: Mono "flanking sub" By: johnnycamp5 on Sat, 05 December 2015 15:54
		Re: Mono "flanking sub" By: jonone on Sun, 06 December 2015 04:26
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 03:00
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 08:46
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 10:50
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 11:08
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 12:39
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 12:46
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 13:01
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 13:40
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 14:30
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 15:00
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 15:32
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 03:27
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 08:36
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 08:49
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 10:25
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 11:09
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 13:41
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 13:53
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 17:16
		Re: Mono "flanking sub" By: jonone on Sat, 16 July 2016 01:37
		Re: Mono "flanking sub" By: Wayne Parham on Sat, 16 July 2016 09:06
		Re: Mono "flanking sub" By: jonone on Sat, 16 July 2016 09:25
		Re: Mono "flanking sub" By: johnnycamp5 on Sat, 16 July 2016 11:48
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 09:31
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 10:04
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 11:16
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 12:05
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 12:55
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 15:31
		Re: Mono "flanking sub" By: johnnycamp5 on Sun, 17 July 2016 16:18
		Re: Mono "flanking sub" By: jonone on Mon, 18 July 2016 07:52
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 18 July 2016 10:46
		Re: Mono "flanking sub" By: jonone on Wed, 10 August 2016 13:25
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 10 August 2016 15:01
		Re: Mono "flanking sub" By: jonone on Thu, 11 August 2016 08:00
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 11 August 2016 08:40
		Re: Mono "flanking sub" By: jonone on Thu, 11 August 2016 14:54
		Re: Mono "flanking sub" By: jonone on Fri, 21 October 2016 12:52

Previous Topic:	Interconnect cables
Next Topic:	Class d for flanking subs

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 22:18:41 CST 2024