AudioRoundTable.com: Pi Speakers » 4 Pi build questions

Home » Sponsored » Pi Speakers » 4 Pi build questions

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4 Pi build questions [message #82593]

Fri, 06 May 2016 09:34

brookhart995
Messages: 5
Registered: February 2016
Location: Dallas, Texas

Esquire

I am getting my materials ready to start this build and I have a few questions.

I am using the Eminence PSD2002-S 8ohm horn driver and the JBL 2226H woofer. I was able to get both at reasonable prices (used). The horn flare is specified as the H290c, is there a difference between this flare and the H290s that P.E. sells? In the crossover schematic it shows a 100watt 8ohm resister that is in line with the positive terminal of the woofer, is this the type of resister I need to use?

http://www.mouser.com/ProductDetail/ARCOL-Ohmite/HS100-8R-F/?qs=sGAEpiMZZMtlubZbdhIBIEidPY%252bx%2fLaaBDWQceqDgFs%3d

As for the speaker box design I was thinking of something like this?

http://www.critesspeakers.com/_Media/csiiready_med.jpeg

The main design detail I like is the recessed baffle that would allow a flush grill. Would doing this compromise the sound quality as it would need to be designed this way when the crossover is designed?

Thanks for helping me out.

Ryan

Report message to a moderator

Re: 4 Pi build questions [message #82595 is a reply to message #82593]

Fri, 06 May 2016 10:58

Wayne Parham
Messages: 18785
Registered: January 2001

Illuminati (33rd Degree)

I love recessed grilles. See below how I had mine done. I borrowed that look from a builder here named Garland. He built a pair of speakers like this around 2000 or 2001, and I was smitten. So the next cabinet I had made borrowed the same look:

The grille isn't shown in the photo above, but it's dark brown and fits in the recess.

As for the Eminence H290, it's a great little radial horn and we used it for many years. But the H290C is a significant improvement. It's worth the extra cost. That's why I had an injection mold made - That's how much it was worth it to me.

The crossover is slightly different depending on which horn/waveguide you use. The only one we provide now is the H290C OSEC Waveguide.

For more information, see the thread below:

H290C Horn/Waveguide

Report message to a moderator

Previous Topic:	4 Pi Flush Mounting Information (2016)
Next Topic:	4pi 100 watt 8ohm resister?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 11:17:17 CST 2024