AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 8pi plans?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 8pi plans? [message #82001 is a reply to message #81990]

Wed, 10 February 2016 13:13

brookhart995
Messages: 5
Registered: February 2016
Location: Dallas, Texas

Esquire

Thanks for the plans. I have a question though. Where and how do you mount the 10" driver? Is there a cutout on the baffle or does it mount to a solid baffle where only the rear cone is vented through the horn and bottom ports? In the drawings there is plenty of detail on the exterior of the cabinet and the wood horn, but not the internals of the enclosure.

Thanks

Report message to a moderator

[Message index]

		8pi plans? By: brookhart995 on Wed, 10 February 2016 05:54
		Re: 8pi plans? By: Wayne Parham on Wed, 10 February 2016 08:33
		Re: 8pi plans? By: brookhart995 on Wed, 10 February 2016 13:13
		Re: 8pi plans? By: Wayne Parham on Wed, 10 February 2016 13:25
		Re: 8pi plans? By: brookhart995 on Wed, 10 February 2016 15:10
		Re: 8pi plans? By: Wayne Parham on Wed, 10 February 2016 15:49

Previous Topic:	2Pi Tower Plans
Next Topic:	4pi speaker plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 02:29:00 CST 2024