Home » Audio » Speaker » Mono "flanking sub"
Re: Mono "flanking sub" [message #81686 is a reply to message #81685] Wed, 25 November 2015 18:08 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

The phase differences in filter types are extremely subtle in comparison to the disparate phase relationships between reflections and direct sounds that we seek to address with multiple subs, both flanking and distributed.

The differences between filter types are very important to summing between point sources. But we're not talking about that here. We're dealing with dense interference. Rather than trying to combine two point sources constructively, we're blending a large number of reflections and direct sound sources with complex phase relationships.

So there is no "correct" filter type. It is actually non-sequiter to discuss filter type in this context. Basically, you want the slope that works best. You'll find that empirically. But don't expect much change between the filter types. The phase difference is tiny compared to the differences in phase between sound sources and their reflections.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Interconnect cables
Next Topic: Class d for flanking subs
Goto Forum:
  


Current Time: Tue Nov 26 14:58:36 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest