AudioRoundTable.com: Speaker » Mono "flanking sub"

Home » Audio » Speaker » Mono "flanking sub"

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Mono "flanking sub" [message #81663 is a reply to message #81659]

Tue, 10 November 2015 14:06

jonone
Messages: 67
Registered: October 2015

Viscount

I've dialled in the flanking sub for now as I'm waiting for my sub driver from ae, I was then going to use that nearfield as I'm only using one so I should get the most tactile output.

I was going to run that from the lfe channel with a 60hz crossover so it's not localisable this also means the mains are being relieved of some bass but the flanking sub get high passed at 60hz too, so maybe I should run them full range as I will get better smoothing by having all three overlapping fully? The down side is I may loose some content from the lfe channel, ( did you get to the bottom of that) and I beleive there will be some intermod distortion from the mains although the manufacture has told me only a 100hz and above crossover helps with that.

I have a mountain of a room mode at 40hz, ( you can just see it peaking out in my graphs) the flanking sub helps reduce it, I was thinking the crossover at 60hz will also reduce it as the mains and flanking sub are rolling of, but maybe not high passing the mains/flanking sub and just over lapping the nearfield at circa 60hz will actually help depending on how it sums?

Do you think I can improve the 200hz region or are flanking subs done at 150hz?

Lastly, my nearfield sub will have a sweepable phase knob 0-180, does this effectively do the same thing as delay? Or do I get it as flat as I can with that then try and adjust the delay afterwards?
Thanks again for your help, I appreciate it!

Jon

Report message to a moderator

[Message index]

		Mono "flanking sub" By: jonone on Sat, 24 October 2015 05:50
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 25 October 2015 15:20
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 08:14
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 26 October 2015 08:44
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 12:05
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 15:06
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 27 October 2015 13:23
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 27 October 2015 18:14
		Re: Mono "flanking sub" By: jonone on Thu, 29 October 2015 04:10
		Re: Mono "flanking sub" By: johnnycamp5 on Thu, 29 October 2015 11:24
		Re: Mono "flanking sub" By: jonone on Thu, 29 October 2015 14:23
		Re: Mono "flanking sub" By: johnnycamp5 on Fri, 30 October 2015 05:10
		Re: Mono "flanking sub" By: jonone on Fri, 30 October 2015 05:17
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 30 October 2015 16:37
		Re: Mono "flanking sub" By: johnnycamp5 on Fri, 30 October 2015 17:58
		Re: Mono "flanking sub" By: jonone on Sat, 31 October 2015 13:21
		Re: Mono "flanking sub" By: Wayne Parham on Sat, 31 October 2015 15:37
		Re: Mono "flanking sub" By: jonone on Sun, 08 November 2015 13:52
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 09 November 2015 12:57
		Re: Mono "flanking sub" By: jonone on Mon, 09 November 2015 14:44
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 09 November 2015 21:14
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 14:06
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 10 November 2015 14:43
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 15:21
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 16:21
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 11 November 2015 14:16
		Re: Mono "flanking sub" By: jonone on Wed, 11 November 2015 14:38
		Re: Mono "flanking sub" By: jonone on Tue, 24 November 2015 11:01
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 24 November 2015 12:46
		Re: Mono "flanking sub" By: jonone on Tue, 24 November 2015 14:01
		Re: Mono "flanking sub" By: jonone on Wed, 25 November 2015 16:12
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 25 November 2015 18:08
		Re: Mono "flanking sub" By: jonone on Thu, 26 November 2015 02:58
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 27 November 2015 16:23
		Re: Mono "flanking sub" By: jonone on Sat, 28 November 2015 11:29
		Re: Mono "flanking sub" By: jonone on Sun, 29 November 2015 14:41
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 30 November 2015 10:31
		Re: Mono "flanking sub" By: jonone on Mon, 30 November 2015 12:27
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 01 December 2015 12:01
		Re: Mono "flanking sub" By: jonone on Tue, 01 December 2015 16:05
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 01 December 2015 20:10
		Re: Mono "flanking sub" By: jonone on Wed, 02 December 2015 02:58
		Re: Mono "flanking sub" By: johnnycamp5 on Wed, 02 December 2015 05:19
		Re: Mono "flanking sub" By: jonone on Wed, 02 December 2015 07:07
		Re: Mono "flanking sub" By: jonone on Sat, 05 December 2015 08:27
		Re: Mono "flanking sub" By: johnnycamp5 on Sat, 05 December 2015 15:54
		Re: Mono "flanking sub" By: jonone on Sun, 06 December 2015 04:26
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 03:00
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 08:46
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 10:50
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 11:08
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 12:39
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 12:46
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 13:01
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 13:40
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 14:30
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 15:00
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 15:32
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 03:27
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 08:36
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 08:49
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 10:25
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 11:09
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 13:41
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 13:53
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 17:16
		Re: Mono "flanking sub" By: jonone on Sat, 16 July 2016 01:37
		Re: Mono "flanking sub" By: Wayne Parham on Sat, 16 July 2016 09:06
		Re: Mono "flanking sub" By: jonone on Sat, 16 July 2016 09:25
		Re: Mono "flanking sub" By: johnnycamp5 on Sat, 16 July 2016 11:48
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 09:31
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 10:04
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 11:16
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 12:05
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 12:55
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 15:31
		Re: Mono "flanking sub" By: johnnycamp5 on Sun, 17 July 2016 16:18
		Re: Mono "flanking sub" By: jonone on Mon, 18 July 2016 07:52
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 18 July 2016 10:46
		Re: Mono "flanking sub" By: jonone on Wed, 10 August 2016 13:25
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 10 August 2016 15:01
		Re: Mono "flanking sub" By: jonone on Thu, 11 August 2016 08:00
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 11 August 2016 08:40
		Re: Mono "flanking sub" By: jonone on Thu, 11 August 2016 14:54
		Re: Mono "flanking sub" By: jonone on Fri, 21 October 2016 12:52

Previous Topic:	Interconnect cables
Next Topic:	Class d for flanking subs

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 20:03:41 CST 2024