petew Messages: 63 Registered: June 2011 Location: Albuquerque, NM USA
Viscount
I'm looking for opinions on bass trapping. I've got a lead on some fairly high density foam acoustic panels from a recording studio that's being decommissioned. I could repurpose the panels easily to make bass traps in the front corners of my room. My question is what to do with corner traps once I get around to building my 7 pi corner horns? Could I place the corner horn as usual and keep the bass trap from the top of the cabinet to the ceiling or would it affect the performance of the corner horn?
And a somewhat related subject, I've got open bottom soffits that I have planned to stuff to also absorb bass. Would these foam panels be good for that application too?
I've read "you can't have too much bass trapping" as long as you don't make the room too dead. My room sounds really good now, I just want to jump on the free stuff if it might make it better.
A 200 amp Equi=Tech balanced power unit is coming out of this studio too. Any ideas how to market such a contraption? I figured I'd start with craigslist. Maybe try audiogon and flea bay too.
Wayne Parham Messages: 18786 Registered: January 2001
Illuminati (33rd Degree)
Damping is even more important than placement, in my opinion. Actually, it's not an opinion, the facts support this - You can measure more benefit from damping than anything else. The good news is framed drywall construction provides much better damping than hard walls, and most North American homes are made this way. The drywall acts something like a panel absorber. As for additional damping, it never hurts. I would prefer panel dampers to resonant bass traps though. A large lossy panel just works better.
petew Messages: 63 Registered: June 2011 Location: Albuquerque, NM USA
Viscount
Oh what an interesting week it's been (and its only Tuesday).
Over the Memorial weekend and the following week, I worked on a cabin that my family is building in the Jemez Mountains in NM. Obviously, ear protection is always a top priority when working with power tools. I was diligent with my foam ear plugs.
Anyway, last week my right ear started to go kaput. I couldn't hear squat, and the left channel was fading too. I tried the over the counter remedies to no avail, and finally went to see the doctor yesterday. I hate going to the doctor - I always assume the worst.
After about 20 minutes with the pressure washer he knocked a massive wax plug out of the right channel. The left channel only took a few minutes to clear. I think a week of foam ear plugs and sweat pushed the crud up into the earholes. I'm hearing high frequencies and nuances that I had forgotten about! It got me thinking about all the great concerts and movies I've got queued up to listen to in my theater.
On a whim I searched eBay today for "2226H" and got a hit! Someone had a few for sale for only $200 each "buy now" plus $30 shipping. I ended up buying three for $600 with shipping included!! I should receive them next week. From the photos they appear to be in great shape, and the DC resistance of the coils was within expectations.
Finally I've taken the first step towards 7pi corner horns with a 4pi center. It'll be a while before I can start construction with the cabin and a hundred other projects ahead of me, but IT'S A START!!
petew Messages: 63 Registered: June 2011 Location: Albuquerque, NM USA
Viscount
I received the 2226H drivers this week. They look to be in excellent condition and got here unscathed due to great packaging. I just ordered three waveguides from Wayne. I'll keep collecting up parts as budget allows. I should have all the components on hand before I can fit the build into my schedule.
petew Messages: 63 Registered: June 2011 Location: Albuquerque, NM USA
Viscount
Getting closer here. I've got the living room end tables just about done, then I can start building pi's. Wayne is sending me a set of pc boards for the crossovers. The xo parts are in my wish list at Parts-Express, just waiting for me to do another double-check before I hit send. Plywood is on hand for the bass bins. I've got the mid horns modeled in sketch up. I'm itching to make dust!
Outlaw 990 prepro got retired in December and replaced with an Emotiva UMC-200 (nice piece). I'm ripping all my Blu-Ray and DVD discs to the server and I'll be exclusively using the HTPC. Finally had a belly full of forced ads and trailers on disc.
I'll be updating this with relevant information (instead of irrelevant rambling) as soon as I get under way.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
