Greg32 Messages: 1 Registered: June 2014 Location: Melbourne Australia
Esquire
Hello,
I have these components and im looking for the best way to implement them, I figure that the H290C horn and the 2426H work nicely together with the 4pi crossover but this would need a touch of attenuation to align with the 2206H woofer, any pointers would be greatly appreciated. I understand that the r1 and r2 values need adjusting.
Thank you Greg
Wayne Parham Messages: 18787 Registered: January 2001
Illuminati (33rd Degree)
The JBL 2426/H290C combination is excellent, and the π crossover is perfectly suited for them. However, the summing and lobe orientation is dependent on the inter-relationship between woofer and tweeter, with the crossover sort of stitching them together. They have to be seen as a matched set, and you probably won't get the best results from using the stock crossover and manipulating just the R1/R2 values to match SPL levels. I would suggest reading the thread below:
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
