Home » Sponsored » Pi Speakers » Home theater with 4PI & 1 Pi
Re: Home theater with 4PI & 1 Pi [message #79740 is a reply to message #79711] Thu, 20 March 2014 13:41 Go to previous messageGo to previous message
rkeman is currently offline  rkeman
Messages: 78
Registered: March 2010
Location: Florida
Viscount
All of the elements for an excellent home theater are there! The planned acoustic room treatments should include an appropriate acoustic ceiling tile, first reflection point and corner bass absorption, and as much diffusion as possible. The Oppo BDP-105 is a superb BluRay player and can serve as a good basic preamplifier/processor if only a few sources will be required. What it doesn't provide is electronic room correction. This can be accomplished in the bass region with any of a number of devices (Velodyne SMS-1, mini DSP, etc...) feeding the subwoofer(s) amplifier. A few inexpensive basic measurement tools would allow the response to be optimized at the listening position with relative ease and can greatly ease the tuning process. More advanced room correction (Audyssey MultiEQ XT-32, Anthem ARC, and Dirac among others) would require a dedicated preamplifier/processor and may yield even more benefit. Good luck!
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Theater room LCR
Next Topic: New Pi 4 + Pi 3 Sub buildout
Goto Forum:
  


Current Time: Tue Aug 20 03:16:25 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest