Sound fading in and out [message #79487] |
Wed, 19 February 2014 02:07 |
timron
Messages: 251 Registered: March 2012
|
Grand Master |
|
|
I have a home theater system that is way too new to be giving me problems. It doesn't seem to know that (or care), however, and the sound is fading in and out. I've checked all the speaker wires and don't see anything loose. What else could it be?
|
|
|
|
|
|
|
Re: Sound fading in and out [message #79883 is a reply to message #79509] |
Mon, 28 April 2014 20:32 |
Bill Wassilak
Messages: 402 Registered: May 2009
|
Illuminati (1st Degree) |
|
|
I've seen it in the decoder sections of some receivers, if the source was recorded in DTS, Dolby Prologic etc, sometimes the receiver will have a hard time deciphering the difference. Make sure your speaker selection is set up right, Left and Right channels, Center channel if your using one, and the left and right rear channels. Some receivers you can set the distance between the front and rear speakers and control the volume levels between each of the speakers to your listening position.
|
|
|