AudioRoundTable.com: Pi Speakers » H290C and JBL LE14H-3

Home » Sponsored » Pi Speakers » H290C and JBL LE14H-3

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: H290C and JBL LE14H-3 [message #79476 is a reply to message #79360]

Mon, 17 February 2014 09:06

maxserg
Messages: 1
Registered: February 2014
Location: Montreal

Esquire

The freq resp in on axis for the LE14. No shure it would go higher than 500/800Hz, you would need a horn that goes lower. The dispersions need to be almost the same for the 2 components at xover point.

Report message to a moderator

[Message index]

		H290C and JBL LE14H-3 By: BHamm on Fri, 07 February 2014 13:12
		Re: H290C and JBL LE14H-3 By: Bill Epstein on Sat, 08 February 2014 16:04
		Re: H290C and JBL LE14H-3 By: BHamm on Sat, 08 February 2014 16:07
		Re: H290C and JBL LE14H-3 By: BHamm on Sat, 08 February 2014 16:38
		Re: H290C and JBL LE14H-3 By: maxserg on Mon, 17 February 2014 09:06
		Re: H290C and JBL LE14H-3 By: BHamm on Mon, 17 February 2014 10:43

Previous Topic:	Speaker stuffing
Next Topic:	Restoring a 1951 Philco 5W mono console... Thinking a 7 Pi! (Have a few questions)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Feb 19 20:04:27 CST 2025