gstarey66 Messages: 12 Registered: January 2014 Location: Engineer
Chancellor
Yes, I do agree the design is well done. I did not make any major changes to it as I changed only two things which hopefully came close to cancelling each other out. Note: Size of the box was done exactly according to the plans.
1. Additional bracing.
2. Some thicker insulation at two spots of the four spots Wayne recommended insulation. I have been told this is equal to adding a bit of size to the box. Note again - other two insulation spots were R11 and are there.
So, I decreased the available space (size) somewhat by adding a brace and then in increased the effetive space by adding some additional insulation. I did make sure the port was clear and not impeded by the additional insulation.
What I had actually asked was if this resoning made sense to someone who knows more about speaker design than I do.