Home » Sponsored » Pi Speakers » 3 PI build (Building a pair of 3 Pi speakers)
Re: 3 PI build [message #79046 is a reply to message #78971] Thu, 23 January 2014 17:26 Go to previous messageGo to previous message
BFP is currently offline  BFP
Messages: 48
Registered: May 2009
Baron
Now it's time to build the box and brace it. I started by gluing the top and sides to the baffle then added the bottom. Clamps were left on for a few hours and the boxes left for 24hrs before being handled.

index.php?t=getfile&id=1384&private=0

index.php?t=getfile&id=1385&private=0

index.php?t=getfile&id=1386&private=0

Next up, bracing. I'm a fan of using a lot of bracing inside cabinets, especially large ones. I decided on 2 window braces, one below the horn and one between the port and the woofer. I also added a brace at the mid point of the woofer and stick braces on all the panels. Cutting or routing braces can be a lot of work. I cut this down by gang drilling the corners of the 4 window braces and cutting as much as possible on the mitre saw. I only had to do the short sides with the jig saw.

4 brace blanks stacked and clamped in place for drilling with a forstner bit.
index.php?t=getfile&id=1387&private=0

One of the braces being installed
index.php?t=getfile&id=1388&private=0








  • Attachment: DSCF9576.jpg
    (Size: 190.79KB, Downloaded 8433 times)
  • Attachment: DSCF9577.jpg
    (Size: 185.40KB, Downloaded 8450 times)
  • Attachment: DSCF9575.jpg
    (Size: 170.25KB, Downloaded 8444 times)
  • Attachment: DSCF9580.jpg
    (Size: 191.69KB, Downloaded 8512 times)
  • Attachment: DSCF9592.jpg
    (Size: 160.88KB, Downloaded 8435 times)
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Hi and a Few Questions
Next Topic: Happy Pi Day
Goto Forum:
  


Current Time: Fri Nov 22 16:50:51 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest