AudioRoundTable.com: Pi Speakers » 3 Pi Speakers Plans

Home » Sponsored » Pi Speakers » 3 Pi Speakers Plans

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

3 Pi Speakers Plans [message #78676]

Tue, 17 December 2013 13:27

TahoeBob
Messages: 3
Registered: December 2013

Esquire

Any chance I can get the plans for the 3 pi's before I purchase a kit?

I'm looking to start upgrading my speakers now that I have my new XPA-5, and from what I can tell the 3pi's are about perfect for this amp 300watts @ 4 ohms.

My initial plan is to build 3 3pi's for the front channels and see how it goes.

I also had a question about the 4pi's and 6pi's what is the minimum amp rating for these? I eventually would like to build these as the front channels and move the 3pi's to the back.

Thank you in advance.

Bob

Report message to a moderator

Re: 3 Pi Speakers Plans [message #78679 is a reply to message #78676]

Tue, 17 December 2013 14:56

Wayne Parham
Messages: 18721
Registered: January 2001

Illuminati (33rd Degree)

You've got mail!

About amplifier power: Some people run them with single ended 2A3 amps, and those can only source about two watts. However, I prefer them on an amp that is capable of at least ten watts.

Report message to a moderator

Re: 3 Pi Speakers Plans [message #78721 is a reply to message #78679]

Fri, 20 December 2013 11:40

TahoeBob
Messages: 3
Registered: December 2013

Esquire

Hi Wayne,

Thank you very much for the plans. I was checking on your site (this page: http://www.PiSpeakers.com/Prices.html) and it looks like the 4Pi speakers use a slightly smaller cabinet, is this true?

If it is the 4Pi's may be a better choice for me at the moment.

Report message to a moderator