AudioRoundTable.com: Silicon Valley » Proper fuse for Ueri power amp

Home » Audio » Silicon Valley » Proper fuse for Ueri power amp

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Proper fuse for Ueri power amp [message #7854]

Tue, 04 October 2005 10:14

josh
Messages: 9
Registered: May 2009

Esquire

I recently purchased three used Ueri power amps. They all need new fuses as the fuses are missing. The back of the power amp says they need either 2 amp at 120v or 4 amp at 250 v. When I went to buy fuses the guy at the electronics store argued with me about the proper fuses to use, he said it didn't matter what the back of the amp specified in 120 v, that I should only pay attention to the 4 amp at 250 v fuse rating. Since I am running this amp at 120 v, shouldn't I use the 2 amp 120 v slow blow fuse that is specified on the back of the amplifier?

Report message to a moderator

Re: Proper fuse for Ueri power amp [message #7855 is a reply to message #7854]

Tue, 04 October 2005 16:53

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

You are right. Get the proper fuse for 120VAC.

Report message to a moderator

Re: Proper fuse for Ueri power amp [message #7856 is a reply to message #7855]

Wed, 05 October 2005 07:34

josh
Messages: 9
Registered: May 2009

Esquire

Thanks, although I was wrong in my original posting it was a 4 amp 120v fuse or a 2 amp 250 v fuse. I tested a 2 amp 250 v fuse with the amp and had no problems.

Report message to a moderator

Previous Topic:	ST L9111 ic info
Next Topic:	class D

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 14 22:22:13 CST 2024