AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 4Pi with feet (images of my 4pi project)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4Pi with feet [message #78127]

Thu, 17 October 2013 10:41

lucasmateo
Messages: 43
Registered: October 2013

Baron

Hi,

This is my first post here, I've been emailing Wayne for a while for my 4 pi project, and now i'll show some of the work i've done.

I've followed Wayne's plans, and used JBL 2226h woofer/mid and b&c de250 comp. tweeter. I modified the bottom of the speakers adding some MDF solid feet and made the front face thicker to cover the woofer.

I hope you like it, the photos are quite bad, as my iphone is quite destroyed. Next week I'll post some photos with a better camera.

BTW, thanks you all in the forum for all the info posted here Smile

Lucas.

Attachment: 4Pi_IMG_1185.jpg
(Size: 641.74KB, Downloaded 8573 times)
Attachment: 4Pi_IMG_1186.jpg
(Size: 639.43KB, Downloaded 8639 times)
Attachment: 4Pi_IMG_1187.jpg
(Size: 666.71KB, Downloaded 8604 times)
Attachment: 4Pi_IMG_1188.jpg
(Size: 643.19KB, Downloaded 8626 times)
Attachment: 4Pi_IMG_1190.jpg
(Size: 662.32KB, Downloaded 8662 times)
Attachment: 4Pi_IMG_1191.jpg
(Size: 668.80KB, Downloaded 8668 times)

Report message to a moderator

Re: 4Pi with feet [message #78128 is a reply to message #78127]

Thu, 17 October 2013 11:03

lucasmateo
Messages: 43
Registered: October 2013

Baron

I forgot to ask what kind of cable is recommended for internal wiring.
solid cooper, stranded? 16awg? 22awg?

thanks,
Lucas

Report message to a moderator

Re: 4Pi with feet [message #78130 is a reply to message #78128]

Thu, 17 October 2013 15:27

tom-m
Messages: 56
Registered: December 2009
Location: Texas

Baron

Your boxes look nice. For the wiring, I think 20 or 22 ga would be a bit small. 16 or 18 should work fine.

Report message to a moderator

Re: 4Pi with feet [message #78131 is a reply to message #78130]

Thu, 17 October 2013 16:25

lucasmateo
Messages: 43
Registered: October 2013

Baron

Thanks Tom.
So normal 16awg speaker wire should work ok I think.

Report message to a moderator

Re: 4Pi with feet [message #78133 is a reply to message #78131]

Thu, 17 October 2013 16:53

Wayne Parham
Messages: 18709
Registered: January 2001

Illuminati (33rd Degree)

Looks great! And yes, 16 guage stranded speaker wire is just perfect. That's what we provide in our kits.

Report message to a moderator

Re: 4Pi with feet [message #78134 is a reply to message #78133]

Thu, 17 October 2013 17:16

lucasmateo
Messages: 43
Registered: October 2013

Baron

This is my "feet inspiration". Don't tell them Razz

Attachment: prod_prime.jpg
(Size: 154.15KB, Downloaded 8094 times)

Report message to a moderator

Re: 4Pi with feet [message #78135 is a reply to message #78127]

Thu, 17 October 2013 20:46

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Is that way cool parallax in Pic #4 or did you build in a tilt?

Excellent casework!

Report message to a moderator

Re: 4Pi with feet [message #78138 is a reply to message #78135]

Thu, 17 October 2013 21:46

lucasmateo
Messages: 43
Registered: October 2013

Baron

Thanks Bill!

The feets on the front are taller than the ones on the back. So the speakers are tilted 5 degrees, its subtle, but it works great in my room. And I liked how they looked tilted!

By making this gap with the floor, I can install the binding posts on the bottom of the speakers, hidden

Here is a side view of the speaker:

index.php?t=getfile&id=1287&private=0