AudioRoundTable.com: Pi Speakers » Pete's Home Theater Build

Home » Sponsored » Pi Speakers » Pete's Home Theater Build

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Pete's Home Theater Build [message #68358]

Mon, 27 June 2011 09:40

petew
Messages: 63
Registered: June 2011
Location: Albuquerque, NM USA

Viscount

I'm in dire need of four surrounds. Is the 2 pi suitable for on-wall installation? Will they perform well at about 5' to 6' above the floor?

I'm also interested in building a trio of 4 pi for LCR duty. Will need to modify my screen to AT first, and start saving my nickles and dimes.

I'd appreciate any suggestions, and a set of plans.

Thanks in advance

Report message to a moderator

Re: Pete's Home Theater Build [message #68359 is a reply to message #68358]

Mon, 27 June 2011 11:05

Wayne Parham
Messages: 18723
Registered: January 2001

Illuminati (33rd Degree)

I'm running two π studio monitors for my surrounds. I think that's the perfect application for them. They don't really need a lot of bass extension, just to match spectral balance above the modal range. So they're perfect when used for surrounds with the larger (3, 4, 6 or 7) models as mains. And wall mounting is a good way to go. I personally have my surrounds on bookshelves, beside and behind the listening area.

Report message to a moderator

Re: Pete's Home Theater Build [message #68360 is a reply to message #68358]

Mon, 27 June 2011 11:31

petew
Messages: 63
Registered: June 2011
Location: Albuquerque, NM USA

Viscount

I appreciate the feedback Wayne. Please send cabinet drawings when you get a chance. Don't need the 4 pi drawings yet, since I have looked at a bunch of build threads and have a pretty good handle on what's involved.

I do want to build the 2 pi's sometime this summer.

Thanks

Report message to a moderator

Re: Pete's Home Theater Build [message #68361 is a reply to message #68360]

Mon, 27 June 2011 12:33

Wayne Parham
Messages: 18723
Registered: January 2001

Illuminati (33rd Degree)

You've got mail!

Report message to a moderator

Re: Pete's Home Theater Build [message #75710 is a reply to message #68361]

Tue, 05 March 2013 10:50

petew
Messages: 63
Registered: June 2011
Location: Albuquerque, NM USA

Viscount

I'm finally moving on this project. I ordered everything from PE last night and have Baltic Birch plywood in stock. I'll start making dust this weekend. I'll post progress pictures here.

I'll build a set of 6π cornerhorns later - hopefully this summer if $$$ allows.

Report message to a moderator

Re: Pete's Home Theater Build [message #75711 is a reply to message #75710]

Tue, 05 March 2013 10:54

Wayne Parham
Messages: 18723
Registered: January 2001

Illuminati (33rd Degree)

Yes, please do. We love build pics!

Report message to a moderator

Re: Pete's Home Theater Build [message #75762 is a reply to message #75711]

Mon, 11 March 2013 10:06

petew
Messages: 63
Registered: June 2011
Location: Albuquerque, NM USA

Viscount

I've got a question on insulation lining for the 2π boxes. The general instructions call for R-11 or R-13 insulation on the bottom, back, and side nearest the port.

Would 1" rigid rockwool insulation perform equivalently? I have some on hand I'd like to use.

Thanks

Report message to a moderator

Re: Pete's Home Theater Build [message #75763 is a reply to message #75762]

Mon, 11 March 2013 10:34

Wayne Parham
Messages: 18723
Registered: January 2001

Illuminati (33rd Degree)

I don't know, Pete. I haven't tried the stuff.

I will say this: A few years back, I guess about 15 years ago, there was a push to change damping materials so I tried a few alternates. Some were purpose designed for sound absorption, others were just stuffing. My testing criteria was pretty simple, run some white noise and see which was most attenuated. What I found surprised me - Nothing worked as well as R11 and some materials were significantly worse. So I decided the old tried-and-true R11 was best and never looked back.

Report message to a moderator

Re: Pete's Home Theater Build [message #76938 is a reply to message #75763]

Mon, 03 June 2013 20:08

petew
Messages: 63
Registered: June 2011
Location: Albuquerque, NM USA

Viscount

We're a few months after arrival of my components, but I finally got started!

Here's a build thread over at AVS. I'll put together another thread here after everything is up and running.

http://www.avsforum.com/t/1475658/2-pi-surround-speaker-project

Report message to a moderator