Home » Sponsored » Pi Speakers » 4Pi plans
4Pi plans [message #74615] Tue, 27 November 2012 23:51 Go to next message
dheflin44 is currently offline  dheflin44
Messages: 47
Registered: November 2012
Location: Carrollton, TX
Baron
Hi Wayne,

Can I get the 4Pi plans?

I also had a question about speaker height. I plan to use the 4Pis against the front wall around 3' from the corners. Most of the pictures I see have the 4Pis sitting on the ground which would place the tweeter center about 21" above the floor. Would there be a problem with using a 14" stand with the 4Pis to get the tweeter height closer to ear level? Would tilting the speakers be a better option?

Thanks,
Darrell
Re: 4Pi plans [message #74624 is a reply to message #74615] Wed, 28 November 2012 10:02 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18707
Registered: January 2001
Illuminati (33rd Degree)

Actually, I think most people run four π speakers on stands about that height - 12" to 15", with maybe a 3° to 5° tilt back. This is the preferred method with flanking subs.

I've sent plans for the four π mains. If you don't already have subs to flank the mains, let me know and I'll send plans for those also.

http://lonestaraudiofest.com/2009/Photos/PiSpeakers_10.jpg
four π speakers flanked with three π subs


http://lonestaraudiofest.com/2009/Photos/PiSpeakers_02.jpg
Closeup of left speaker and its flanking sub


Re: 4Pi plans [message #74641 is a reply to message #74624] Wed, 28 November 2012 23:48 Go to previous messageGo to next message
dheflin44 is currently offline  dheflin44
Messages: 47
Registered: November 2012
Location: Carrollton, TX
Baron
Thanks, looking forward to the build.

-Darrell
Re: 4Pi plans [message #75415 is a reply to message #74641] Fri, 01 February 2013 14:19 Go to previous messageGo to next message
tom-m is currently offline  tom-m
Messages: 56
Registered: December 2009
Location: Texas
Baron
Darrell,
Did you get the 4pi's built?
Re: 4Pi plans [message #75469 is a reply to message #74615] Thu, 07 February 2013 20:54 Go to previous messageGo to next message
Harvey is currently offline  Harvey
Messages: 1
Registered: February 2013
Location: MA
Esquire
Hi Wayne - Can you send me the Pi4 plans as well. I have a pair of 2226 that are begging to get used.

Thanks!
Re: 4Pi plans [message #75470 is a reply to message #75469] Fri, 08 February 2013 08:21 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18707
Registered: January 2001
Illuminati (33rd Degree)

You've got mail!

Previous Topic: Flanking Subs vs Helper Woofers
Next Topic: Pi midhorn: how thick to be effective?
Goto Forum:
  


Current Time: Fri Jun 14 17:11:46 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest