Home » Audio » Thermionic Emissions » Something new on the bench
Something new on the bench [message #74921] Thu, 13 December 2012 20:50 Go to previous message
gofar99 is currently offline  gofar99
Messages: 1936
Registered: May 2010
Location: Southern Arizona
Illuminati (5th Degree)
Hi Everyone, My latest project... A stereo integrated amp with full remote control. Class A pp u/l with up to 25 watts per channel. I do admit to cheating on the remote control section. It is modular and does all the volume, source selection and muting functions. It is the same as the one I had at LSAF in the preamp. This project is not finished yet and it probably will take me a month to get it to the level that I can post the schematics and details. A fun if not particularly inexpensive project (about $200 in trannies alone). For all you folks that can't or won't diy it, I suspect in about 6-9 months my commercial side will be issuing it as either a kit or built (maybe both). Sadly it won't be cheap there either.

index.php?t=getfile&id=942&private=0

index.php?t=getfile&id=943&private=0


Good Listening
Bruce
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: KT120 and KT150 tubes not up to spec
Next Topic: Tube on a Chip?
Goto Forum:
  


Current Time: Sat Aug 03 07:11:14 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest