AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 4 PI by Andy

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4 PI by Andy [message #74022 is a reply to message #74018]

Wed, 03 October 2012 08:04

mantha3
Messages: 72
Registered: May 2012
Location: Lino Lakes, MN

Viscount

These are built on a 12" X 13" board.

I sort of mixed up on what I went $$$ on and what I went cheaper

I used Meniscus Audio 14ga air core inducers so I splurged a bit with these

I used Dayton caps. I used the standard 250V Poly on the 20uf and 10uf and I used the better new Dayton precision grade 250V Poly on the 6.8 and .047.

On the resistors I used the Dayton Precision Audio Grade Resistor line

I probably should have stood up the .6mH Inducer up. I hope this won't be a problem.

Report message to a moderator

[Message index]

		4 PI by Andy By: mantha3 on Wed, 03 October 2012 07:48
		Re: 4 PI by Andy By: mantha3 on Wed, 03 October 2012 08:04
		Re: 4 PI by Andy By: mantha3 on Wed, 03 October 2012 12:48
		Re: 4 PI by Andy By: Wayne Parham on Wed, 03 October 2012 13:14
		Re: 4 PI by Andy By: mantha3 on Wed, 03 October 2012 15:56
		Re: 4 PI by Andy By: mantha3 on Wed, 03 October 2012 16:22
		Re: 4 PI by Andy By: Wayne Parham on Wed, 03 October 2012 16:35
		Re: 4 PI by Andy By: mantha3 on Wed, 03 October 2012 17:52
		Re: 4 PI by Andy By: Wayne Parham on Wed, 03 October 2012 17:55
		Re: 4 PI by Andy By: mantha3 on Wed, 03 October 2012 18:00
		Re: 4 PI by Andy By: Wayne Parham on Wed, 03 October 2012 20:05
		Re: 4 PI by Andy By: mantha3 on Thu, 04 October 2012 07:24
		Re: 4 PI by Andy By: mantha3 on Sat, 03 November 2012 09:26
		Re: 4 PI by Andy By: mantha3 on Sat, 03 November 2012 09:30
		Re: 4 PI by Andy By: zheka on Sat, 03 November 2012 14:56
		Re: 4 PI by Andy By: mantha3 on Sat, 03 November 2012 16:39
		Re: 4 PI by Andy By: Wayne Parham on Sat, 03 November 2012 20:57
		Re: 4 PI by Andy By: mantha3 on Sun, 04 November 2012 16:14
		Re: 4 PI by Andy By: mantha3 on Sat, 10 November 2012 07:49
		Re: 4 PI by Andy By: Wayne Parham on Sat, 10 November 2012 10:04
		Re: 4 PI by Andy By: mantha3 on Sat, 10 November 2012 11:04
		Re: 4 PI by Andy By: zheka on Sun, 20 January 2013 09:25
		Re: 4 PI by Andy By: Wayne Parham on Sun, 20 January 2013 13:01
		Re: 4 PI by Andy By: zheka on Sun, 20 January 2013 13:41
		Re: 4 PI by Andy By: Wayne Parham on Sun, 20 January 2013 17:11
		Re: 4 PI by Andy By: mantha3 on Thu, 18 April 2013 13:01
		Re: 4 PI by Andy By: Wayne Parham on Thu, 18 April 2013 18:36
		Re: 4 PI by Andy By: mantha3 on Thu, 18 April 2013 19:55
		Re: 4 PI by Andy By: mantha3 on Thu, 18 April 2013 19:58
		Re: 4 PI by Andy By: Wayne Parham on Fri, 19 April 2013 00:02
		Re: 4 PI by Andy By: mantha3 on Fri, 19 April 2013 11:57
		Re: 4 PI by Andy By: Wayne Parham on Fri, 19 April 2013 12:56
		Re: 4 PI by Andy By: zheka on Sat, 10 November 2012 13:55
		Re: 4 PI by Andy By: zheka on Sat, 10 November 2012 14:00
		Re: 4 PI by Andy By: Wayne Parham on Sat, 10 November 2012 22:33
		Re: 4 PI by Andy By: mantha3 on Sun, 11 November 2012 08:15
		Re: 4 PI by Andy By: Wayne Parham on Sun, 11 November 2012 10:53
		Re: 4 PI by Andy By: mantha3 on Wed, 14 November 2012 19:59
		Re: 4 PI by Andy By: mantha3 on Fri, 07 December 2012 08:28
		Re: 4 PI by Andy By: zheka on Fri, 07 December 2012 08:49
		Re: 4 PI by Andy By: zheka on Sun, 20 January 2013 14:01

Previous Topic:	2 pi tower folding?
Next Topic:	4 Pi plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 01:56:34 CST 2024