Pro-ject TT and stuff needs to go [message #73362] |
Sun, 22 July 2012 14:12 ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
![](/forum/images/custom_avatars/3806.jpg) |
gofar99
Messages: 1942 Registered: May 2010 Location: Southern Arizona
|
Illuminati (5th Degree) |
|
|
Hi Everyone. It seems that after building my Dual, Rega Rocket TT I once again have too many TTs (now 5). I need to reduce the numbers before it becomes a spousal issue. So I figure my Pro-ject is the one to go. Not that it is flawed or anything, just one too many.
Pro-ject Debut III (black plinth). $450 with the stuff below
Optional acrylic platter (original one as well)
Speedbox
No cartridge (I upgraded the OM5 with a OM30 stylus and it now resides in the Rocket)
But...If you talk to me kindly I could part with a low miles Denon DL110 for $75 more.
I also have an excess Grado Reference Platinum I with low miles that can go for $200. This one will not work in the P-J unless you put a piece of mu metal under a part of the platter. Easy to do and I can show in photos how to do it. Unfortunately I no longer have the metal. It is about $20 on the web.
Neither cartridge has over 150 hours, they probably have under 100.
The Project was modded to put RCA jacks on the back underside of the plinth. I didn't really like the cheap cables it came with so now you can use any that you like.
Buyer pays postage, US only please.
Good Listening
Bruce
|
|
|
|