AudioRoundTable.com: Pi Speakers » Eminence Delta 12LFA

Home » Sponsored » Pi Speakers » Eminence Delta 12LFA

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Eminence Delta 12LFA [message #72992]

Thu, 14 June 2012 07:12

nottaway
Messages: 1
Registered: June 2012
Location: North Carolina

Esquire

Hi Wayne,

I'm building some high efficiency monitors. I have read your white paper and it was very informative. Thank you for sharing your knowlege on speaker design. I'm considering using the Eminence 12LFA woofer in my design and I had a couple questions since you have used it in your designs....

* What advantage does the Delta 12LFA have over the Delta 12 in your opinion?

* Without going into proprietary design territory did you find the 650Hz dip in Eminence's measurements needing treatment with crossover? Did it demonstrate this dip in a box as well?

Nicholas

Report message to a moderator

Re: Eminence Delta 12LFA [message #72993 is a reply to message #72992]

Thu, 14 June 2012 11:19

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

The difference between the Delta 12 and 12LF is just the electro-mechanical specs. The 12LF suited me better, so I used it.

The response is smooth and flat out (within +/-1.5dB) to 2kHz, well above the crossover point. I am very happy with the amplitude response of the Delta12LF - If there's anything I would improve it would be flux modulation. The Delta 12LF has a traditional ferrite motor with no shorting ring. The upgraded TD12S driver has a shorting ring, and that's what makes it better, not the amplitude response.

Report message to a moderator

Previous Topic:	Line level or High level inputs for Subs w/ plate amps
Next Topic:	4 Pi L/R/C placement advice

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 10:27:34 CST 2024