AudioRoundTable.com: Pi Speakers » Wood used in 4PI construction

Home » Sponsored » Pi Speakers » Wood used in 4PI construction (4Pi wood)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Wood used in 4PI construction [message #72881 is a reply to message #72878]

Fri, 01 June 2012 07:51

mantha3
Messages: 72
Registered: May 2012
Location: Lino Lakes, MN

Viscount

I'm going to run with Baltic Birch. I did read up on the wood. It seems it comes in 5' X 5' X 3/4" more than 4' X 8'.

I had to find a source of better grade B. Some places only had the "BBB" lower grade that has the football patchwork in the veneer. I have a place that has "B"/"BB" grade sheets of 5' X 5' X 3/4". "B" grade on one side meaning perfect veneer and then the other has the football patch work that has the football patch matching wood tone.

Thanks Wayne. I think I'm going to build this fall and doing some research at this time.

What do you charge for the 2226h and the B&C driver for the upgraded 4PI? PM or e-mail me this if you can please.

Thanks,

Andy

Report message to a moderator

[Message index]

		Wood used in 4PI construction By: mantha3 on Wed, 30 May 2012 08:37
		Re: Wood used in 4PI construction By: Wayne Parham on Wed, 30 May 2012 09:15
		Re: Wood used in 4PI construction By: mantha3 on Thu, 31 May 2012 08:13
		Re: Wood used in 4PI construction By: mantha3 on Thu, 31 May 2012 08:14
		Re: Wood used in 4PI construction By: Wayne Parham on Thu, 31 May 2012 10:44
		Re: Wood used in 4PI construction By: mantha3 on Fri, 01 June 2012 07:51
		Re: Wood used in 4PI construction By: Wayne Parham on Fri, 01 June 2012 15:11

Previous Topic:	2 Pi plans
Next Topic:	Clamp Rack

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Feb 19 20:18:33 CST 2025