AudioRoundTable.com: Pi Speakers » Off-the-shelf 4 Pi Stand

Home » Sponsored » Pi Speakers » Off-the-shelf 4 Pi Stand

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Off-the-shelf 4 Pi Stand [message #72386]

Wed, 25 April 2012 15:59

jdubs
Messages: 1
Registered: April 2012

Esquire

Hey all

How about this for an off-the-shelf solution?:

http://www.standsandmounts.com/vtirfseries13inchcenterchannelspeakerstandrfc.aspx

The right height (13") and it has an inbuilt 6 degree tilt. Looks pretty good to me but I'd love to hear any other thoughts.

-Jim

Report message to a moderator

Re: Off-the-shelf 4 Pi Stand [message #72387 is a reply to message #72386]

Wed, 25 April 2012 18:18

Wayne Parham
Messages: 18723
Registered: January 2001

Illuminati (33rd Degree)

That looks like it would work just fine. If you get a set of those, report back how they work for you.

I use wood stands with the top plate pretty close in size to the cabinet size. The back edge has a lip that cradles the speaker. I also use rubber underneath to grip the speaker. Between the rear lip and the rubber underneath, the speaker is planted nicely and doesn't move.

Report message to a moderator

Previous Topic:	My Finished 4pi (x2)
Next Topic:	Pi 7 Information

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jul 14 02:04:16 CDT 2024