AudioRoundTable.com: Pi Speakers » Audition in Austin

Home » Sponsored » Pi Speakers » Audition in Austin

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Audition in Austin [message #71903 is a reply to message #71899]

Sat, 24 March 2012 19:25

Nick77
Messages: 44
Registered: February 2011
Location: Austin

Baron

Got a box glued up, and dry fit.

http://i59.photobucket.com/albums/g295/mrnick_2006/pi4003-2.jpg

http://i59.photobucket.com/albums/g295/mrnick_2006/pi4006.jpg

Here is the one were all waiting for. Smile

http://i59.photobucket.com/albums/g295/mrnick_2006/pi4007.jpg

Report message to a moderator

Re: Audition in Austin [message #71906 is a reply to message #71903]

Sun, 25 March 2012 08:45

Wayne Parham
Messages: 18738
Registered: January 2001

Illuminati (33rd Degree)

Lookin' good!

Report message to a moderator

Re: Audition in Austin [message #71908 is a reply to message #71906]

Sun, 25 March 2012 18:30

Nick77
Messages: 44
Registered: February 2011
Location: Austin

Baron

Improvision at its finest:

http://i59.photobucket.com/albums/g295/mrnick_2006/pi4002-4.jpg

Wayne you're right cabinets can be built in a weekend, but it is a lot of work. Smile

http://i59.photobucket.com/albums/g295/mrnick_2006/pi4003-3.jpg

Report message to a moderator

Re: Audition in Austin [message #71912 is a reply to message #71908]

Sun, 25 March 2012 19:41

Nick77
Messages: 44
Registered: February 2011
Location: Austin

Baron

I need to fill a few boo boo's, any recomendations??

Bondo? Elmers wood filler any good?

Report message to a moderator

Re: Audition in Austin [message #71914 is a reply to message #66232]

Mon, 26 March 2012 05:24

Nick77
Messages: 44
Registered: February 2011
Location: Austin

Baron

Also do you remove the paper back on the insulation even for top and sides or just the brace?

Report message to a moderator

Re: Audition in Austin [message #71917 is a reply to message #71908]

Mon, 26 March 2012 08:06

Wayne Parham
Messages: 18738
Registered: January 2001

Illuminati (33rd Degree)

Remove the vapor barrier (paper backing) from the insulation before installing it. That goes for wall linings as well as the cross-section piece.

As for wood filler, we really want guys like Epstein to chime in here because they do more woodworking than I do. I know there are purpose-made wood fillers that I'd rather use to fill a hardwood, but I'm not sure that's the best for MDF. I can't imagine you'd go wrong with that stuff though.

Report message to a moderator