Home » Sponsored » Pi Speakers » Novice and maybe silly question about R3 (4 Pi crossover)
Novice and maybe silly question about R3 [message #71864] Wed, 21 March 2012 04:07 Go to next message
santos is currently offline  santos
Messages: 5
Registered: February 2012
Location: Madrid
Esquire
Dear Wayne: Your 4 Pi crossover just arrive and I would like to ask you a question maybe a silly question- about the piece of aluminium off board. Is it R3? And what is it for? Is it optional? Do I have to connect it to the PCB? What to do with it and how to place it in the box? I'm planning to build 4 Pi JBL and B&C drivers. Sorry for the novice question.
Thank You very much
Santos


Re: Novice and maybe silly question about R3 [message #71867 is a reply to message #71864] Wed, 21 March 2012 08:13 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

The big silver block that comes with the crossover is R3. It is not optional - It must be connected to the crossover board at the R3 connector. Mount it with screws to the inside bottom of the cabinet, right beside the crossover.

Also, make two gaskets from cardboard or sheet PVC. One should be the same size as the crossover and the other is the same size as R3. Use the gaskets underneath the crossover parts when mounting them.
Re: Novice and maybe silly question about R3 [message #71868 is a reply to message #71867] Wed, 21 March 2012 10:37 Go to previous messageGo to next message
santos is currently offline  santos
Messages: 5
Registered: February 2012
Location: Madrid
Esquire
Thank you so much for the quick reply. We are miles away but you are as helpful as if we were next door.
Santos

Re: Novice and maybe silly question about R3 [message #71880 is a reply to message #71868] Thu, 22 March 2012 15:18 Go to previous message
dutchswan0311 is currently offline  dutchswan0311
Messages: 102
Registered: June 2011
Location: Iowa
Viscount
santos wrote on Wed, 21 March 2012 10:37
Thank you so much for the quick reply. We are miles away but you are as helpful as if we were next door.
Santos



Keep it coming with the stupid questions....it prevents me from having to ask them. Wink
Previous Topic: Request for plans
Next Topic: Screws
Goto Forum:
  


Current Time: Sun Nov 24 14:09:42 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest