AudioRoundTable.com: Pi Speakers » H290 bumps / texture inside of horn

Home » Sponsored » Pi Speakers » H290 bumps / texture inside of horn - ok to sand down to smooth?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: H290 bumps / texture inside of horn - ok to sand down to smooth? [message #71778 is a reply to message #71777]

Wed, 14 March 2012 23:54

Wayne Parham
Messages: 18722
Registered: January 2001

Illuminati (33rd Degree)

Yes, the face is where the mounting screws are. I'd prefer T-Nuts or inserts and machine screws to wood screws for mounting the H290. So use the same mounting screws you are using for the woofer.

Report message to a moderator

[Message index]

		H290 bumps / texture inside of horn - ok to sand down to smooth? By: Maxjr on Wed, 14 March 2012 17:08
		Re: H290 bumps / texture inside of horn - ok to sand down to smooth? By: Wayne Parham on Wed, 14 March 2012 21:23
		Re: H290 bumps / texture inside of horn - ok to sand down to smooth? By: Maxjr on Wed, 14 March 2012 23:18
		Re: H290 bumps / texture inside of horn - ok to sand down to smooth? By: Wayne Parham on Wed, 14 March 2012 23:54
		Re: H290 bumps / texture inside of horn - ok to sand down to smooth? By: Maxjr on Thu, 15 March 2012 03:11

Previous Topic:	Center Channel with 6pi Corner Horns
Next Topic:	Let's talk about 4Pi Speaker Stands =p

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jul 11 07:06:00 CDT 2024