AudioRoundTable.com: Pi Speakers » What In-wall AWG to use?

Home » Sponsored » Pi Speakers » What In-wall AWG to use?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: What In-wall AWG to use? [message #71506 is a reply to message #71493]

Thu, 23 February 2012 19:42

dutchswan0311
Messages: 102
Registered: June 2011
Location: Iowa

Viscount

Using the link to the calculator Wayne provided above, it appears like the 16AWG is sufficient for all of the 8ohm loads, which is all of the speakers except for the F20 subs which are a 4ohm load. 14AWG would be needed for those subs, so I will just error on the side of caution and get 14AWG for everything. The 12AWG would definitely have been overkill and seems to be that point of diminishing returns.

Report message to a moderator

[Message index]

		What In-wall AWG to use? By: dutchswan0311 on Thu, 23 February 2012 14:35
		Re: What In-wall AWG to use? By: Wayne Parham on Thu, 23 February 2012 15:26
		Re: What In-wall AWG to use? By: dutchswan0311 on Thu, 23 February 2012 16:43
		Re: What In-wall AWG to use? By: dutchswan0311 on Thu, 23 February 2012 19:42

Previous Topic:	1pi plans
Next Topic:	Need help on 4Pi speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 17:56:35 CST 2024