Home » Sponsored » Pi Speakers » JBL 2226H driver
JBL 2226H driver [message #71424] Mon, 20 February 2012 08:31 Go to next message
gilstone is currently offline  gilstone
Messages: 7
Registered: February 2012
Esquire
Hi Guys,

I have some questions about the JBL 2226H drivers that i have recently purchased.

There are quite a number of small ripples at the back of the woofer as you can see from the picture attached. The previous owner told me that it is not a reconed speaker, all original.
Any idea what caused the small ripples at the back of the woofer?

When i use a meter to measure the impedance of the speakers, it read 5.6 ohms on both the speakers. Is it consider too low? will the impedance drop again with age?


Hope you could clear my doubts. Thanks.

index.php?t=getfile&id=720&private=0
  • Attachment: IMG.JPG
    (Size: 516.02KB, Downloaded 2620 times)
Re: JBL 2226H driver [message #71426 is a reply to message #71424] Mon, 20 February 2012 10:17 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Those are normal. In fact, if you didn't see them, I'd suspect the cone was not a genuine JBL part.

Re: JBL 2226H driver [message #71445 is a reply to message #71426] Tue, 21 February 2012 17:10 Go to previous message
gilstone is currently offline  gilstone
Messages: 7
Registered: February 2012
Esquire
Thanks Wayne.
Previous Topic: 8 Pi Plans
Next Topic: 1pi plans
Goto Forum:
  


Current Time: Wed Nov 27 06:04:33 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest