dutchswan0311 Messages: 102 Registered: June 2011 Location: Iowa
Viscount
After focusing on the exterior of our new winery for the past few months, I am finally returning to speaker building for our dinner theater inside the winery.
I constructed two more 1pi speaker cabinets for the surrounds, but just realized that I used 18mm Baltic Birch and did not account for the extra 3/32" that the 18mm has over the 5/8" stock that the instructions call for. This means the internal space of my 1pi is 3/16" x 3/16" less than what the instructions call for (if my math is right).
Wayne (or anyone); what should I do? Is that an acceptable margin of error that will not have any audible difference than if I had cut it an extra 3/16" wide? Do I scrap them and start over? Thanks in advance for the advice.
P.S. The winery as it looks right now with its new roof. In two weeks the whole building gets stoned to look like a castle.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
