AudioRoundTable.com: Pi Speakers » 4pi plans and questions

Home » Sponsored » Pi Speakers » 4pi plans and questions

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4pi plans and questions [message #71071]

Mon, 23 January 2012 17:18

thedude306
Messages: 2
Registered: January 2012
Location: Saskatoon, SK

Esquire

howdy, could I get a set of your 4pi plans please.

I am going to be building these speakers for my LCR to replace a set of B&W towers. I have a few questions in regards to integrating them into a 11.2 system with all the other speakers being traditional 2 ways with dome tweeters. Should I be concerned? Do you think the timbre matching up front (with the wides and heights) going to be an issue? I am less concerned about the rear two sets of speakers.

I also have a question about a baffle wall install. I found this and just want to clarify that they will perform well in a wall.

http://audioroundtable.com/forum/index.php?t=msg&th=15168&prevloaded=1&&start=60

Thanks for all the help.

Brad T

Report message to a moderator

Re: 4pi plans and questions [message #71072 is a reply to message #71071]

Mon, 23 January 2012 18:21

Wayne Parham
Messages: 18723
Registered: January 2001

Illuminati (33rd Degree)

You've got mail!

Four π speakers are perfectly suited for soffit mounting, in wall, baffle flush. See the following thread:

four π loudspeakers at NJCU sound lab

As for the surround speakers, I really like using one π or two π speakers as surrounds. They're a good match. I can't say about other loudspeakers, of course.

What are you using for subs? I would suggest using flanking subs near the L/R mains, and possibly one or two more distant subs.

Report message to a moderator

Re: 4pi plans and questions [message #71073 is a reply to message #71071]

Mon, 23 January 2012 19:51

thedude306
Messages: 2
Registered: January 2012
Location: Saskatoon, SK

Esquire

Thank you!

I guess I will play the wait and see with the surrounds. I just hate selling (at a loss, but the B&W do hold their value) all the speakers that I have. But I would love to build more speakers as well.

For subs, I am planning on an IB using 8 18" IST Xmass woofers in two manifolds in the baffle wall. The manifolds will be under and slightly to the insides of the 4pi speakers.

I am also trying to incorporate an IB in the back of the room as well. If not I will have a couple large sealed boxes.

using a berhinger FBQ2496 and audessy XT32 for EQ.

I am also on the hunt for better testing equipment, as of right now I am only using a RS SPL meter and test tones.

Brad T

Report message to a moderator