8 Pi Crossover questions [message #70305] |
Sat, 26 November 2011 18:26 ![Go to next message Go to previous message](/forum/theme/AudioRoundTable/images/down.png) |
svinzant
Messages: 6 Registered: November 2011 Location: Milan, IL
|
Esquire |
|
|
Wayne,
I have been studying the 8Pi plans and have a few questions about the crossover.
1/ I see that you have L1 listed as 1.0uF. Should it be 1.0 mH?
2/ Based on the layout of your circuit board, I don't see how L4 can connect to the junction of R4, R5 and the Mid-Woofer "+". (I spoze it could connect to the top of C5a. Comments?
3/ I see you spec the wattage of R2 at 10 Watts non inductive, but did not spec out the wattage for R1, R4 and R5, what should they be?
4/ Does the 8 Pi use a Zobel circuit?
5/ The schematic lists L2, but that is no inductor in the drawing. Is it just shorted with a jumper?
Thanks and sorry for all the noob questions.
Scott
|
|
|