AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Driver Removal

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Driver Removal [message #70060 is a reply to message #69888]

Tue, 08 November 2011 00:19

NWCgrad
Messages: 143
Registered: March 2010
Location: Frederick, United States ...

Master

Wayne Parham wrote on Tue, 25 October 2011 09:44

I use an Allen wrench to lift the woofer (or horn) from the mounting holes. Remove all the screws, and put a decent size Allen wrench in the hole. Tilt until it catches and lift out, basically using the wrench as a prybar.

Worked well once the driver frame broke free from the butyl rubber gasket I made. Repair on the broken terminal on the crossover complete!

VIRIBUS MARI VICTORIA

Report message to a moderator

[Message index]

		Driver Removal By: NWCgrad on Mon, 24 October 2011 23:18
		Re: Driver Removal By: Wayne Parham on Tue, 25 October 2011 09:44
		Re: Driver Removal By: tom-m on Tue, 25 October 2011 11:32
		Re: Driver Removal By: NWCgrad on Tue, 08 November 2011 00:19
		Re: Driver Removal By: Bill Epstein on Tue, 25 October 2011 21:17
		Re: Driver Removal By: NWCgrad on Wed, 26 October 2011 01:19

Previous Topic:	drivers are a couple hours away
Next Topic:	8 Pi plans please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 02:45:32 CST 2024