AudioRoundTable.com: Pi Speakers » Damping material placement

Home » Sponsored » Pi Speakers » Damping material placement

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Damping material placement [message #69269 is a reply to message #69267]

Thu, 01 September 2011 11:33

doucanoe
Messages: 34
Registered: May 2009

Baron

I recall reading about your recommendations for this but with my cab(s) being a little different when about it based on what I thought made sense at the time. What that was, I don't recall exactly. Old age I guess Smile

The differences being that horn and woofer do not share the same space in my cabs. Also, I went with a rear porting arrangement. I would imagine that that same plan would apply though.

Now I just need to pull one of the woofers and see how I went about it.

Thanks Wayne!

RC

Report message to a moderator

[Message index]

		Damping material placement By: doucanoe on Thu, 01 September 2011 09:25
		Re: Damping material placement By: Wayne Parham on Thu, 01 September 2011 10:32
		Re: Damping material placement By: doucanoe on Thu, 01 September 2011 11:33
		Re: Damping material placement By: Wayne Parham on Thu, 01 September 2011 13:19
		Re: Damping material placement By: doucanoe on Thu, 01 September 2011 14:50
		Re: Damping material placement By: Wayne Parham on Thu, 01 September 2011 14:55

Previous Topic:	crossover board assembly
Next Topic:	1/2 PI Crossover

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 04 13:25:49 CST 2024