Home » Sponsored » Pi Speakers » Excited =)
Re: Excited =) [message #68555 is a reply to message #68518] Wed, 13 July 2011 22:52 Go to previous messageGo to previous message
justphil is currently offline  justphil
Messages: 114
Registered: December 2010
Viscount
Well I have made the decision to paint and now my journey begins. I plan on taking my time and just doing what I can =)

This is the work area I have. It aint much but it works. The bench folds up against the wall. I need to lower it to the height of the table saw. I thought I would like it a bit higher but I was wrong.
http://img.photobucket.com/albums/v304/02TJ/IMG_2298.jpg
I am starting with getting the stands painted. I decided I wanted more roundover. The pvc pipes you saw on the bench will be filled with sand to add weight.
http://img.photobucket.com/albums/v304/02TJ/IMG_2299.jpg
This is the MDF sanded and now ready to be sealed. I have read ALLOT online and MDF edges are supposed to be hell. I am going to try the 50/50 glue/water method and seal the entire pieces then prime sand and paint.
http://img.photobucket.com/albums/v304/02TJ/IMG_2300.jpg
I hope all these pics are ok to post.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: PI4 Build for home theatre
Next Topic: Any Pi builders in Ireland ?
Goto Forum:
  


Current Time: Sun Jul 14 01:48:04 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest