AudioRoundTable.com: Pi Speakers » Three Pi push-pull sub plans?

Home » Sponsored » Pi Speakers » Three Pi push-pull sub plans?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Three Pi push-pull sub plans? [message #67897]

Sat, 28 May 2011 13:54

Norris Wilson
Messages: 361
Registered: May 2009

Grand Master

Hi Wayne,

I am curious about your push - pull version of the Three Pi subwoofer. Is there a set of plans available for this version of the Three Pi sub?

I would appreciate it if you would send me a copy if the plans are availble?

Thanks for sharing!

Norris

Report message to a moderator

Re: Three Pi push-pull sub plans? [message #67910 is a reply to message #67897]

Sun, 29 May 2011 08:52

Wayne Parham
Messages: 18739
Registered: January 2001

Illuminati (33rd Degree)

I never made such a thing. But if you take two three π subs and face them together, one with the woofer installed backwards, magnet out, you will have a push-pull sub. Place them close to one another, just to the point where the cone of the forward-facing speaker will not strike the magnet of the other at full excursion. Make your cabinet to position everything that way.

Report message to a moderator

Previous Topic:	2pi studio build (some progress)
Next Topic:	OH Happy, Happy Day!!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Aug 08 05:23:20 CDT 2024