AudioRoundTable.com: Pi Speakers » 4Pi metric adjustments

Home » Sponsored » Pi Speakers » 4Pi metric adjustments

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4Pi metric adjustments [message #67163]

Fri, 22 April 2011 03:53

Frihed89
Messages: 30
Registered: June 2009
Location: Copenhagen, Denmark

Baron

What are the proper thickness dimensions for plywood in metric sizes?

Do I have to make some adjustments, for example for the baffles, or do I just stick with "inches" measurements?

Report message to a moderator

Re: 4Pi metric adjustments [message #67164 is a reply to message #67163]

Fri, 22 April 2011 08:04

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

There's a link to a converter program that will help you convert inches to millimeters on the π Speakers website. Scroll down to the bottom of any page and you'll see the link.

Accuracy to the nearest available millimeter is all that's required. You can use 19mm wood stock in place of 3/4", for example. Even 18mm is fine.

Report message to a moderator