AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 4pi horn position

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4pi horn position [message #66756]

Thu, 24 March 2011 18:49

Mike17W
Messages: 13
Registered: March 2011

Chancellor

When using two mirrored 4pi speakers in a stereo system, should the speakers be positioned so the horn is located on the outside or inside?

Mike

Report message to a moderator

Re: 4pi horn position [message #66757 is a reply to message #66756]

Thu, 24 March 2011 21:28

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

It doesn't really matter because only the nulls are at oblique angles and only very slightly. That said, They are intended to be built and used in mirror images. This is mostly for aesthetics but there is a very small tilt in the position of the forward lobe and the upper and lower nulls. For that reason, I generally suggest the tweeters be outboard. That way the upper null is slightly to the outside and the lower null is slightly to the inside. But again, it's so slight, it really doesn't matter.