AudioRoundTable.com: Pi Speakers » Flush-Mounting Tips Please : )

Home » Sponsored » Pi Speakers » Flush-Mounting Tips Please : ) (Flush mounting Horn and Mid-Woofer)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Flush-Mounting Tips Please : ) [message #66682 is a reply to message #66680]

Wed, 16 March 2011 10:26

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

What we do is to route a groove that is about 1/16" deeper than needed to allow space for a gasket. It should also have about 1/16" gap around the outer edge, so make it 1/8" larger in diameter, i.e. 12-5/8".

You can use any number of things for gasket material, felt, cardboard, etc. I prefer to use PVC sheets. You can get it at any hardware store as shower pan material.

http://www.pispeakers.com/Basshorn/Cutting_Gasket.jpg

Report message to a moderator

[Message index]

		Flush-Mounting Tips Please : ) By: Muzikal-JRNE on Wed, 16 March 2011 10:06
		Re: Flush-Mounting Tips Please : ) By: Wayne Parham on Wed, 16 March 2011 10:26
		Re: Flush-Mounting Tips Please : ) By: Muzikal-JRNE on Wed, 16 March 2011 10:53
		Re: Flush-Mounting Tips Please : ) By: Wayne Parham on Wed, 16 March 2011 11:16
		Re: Flush-Mounting Tips Please : ) By: Bill Epstein on Wed, 16 March 2011 14:17
		Re: Flush-Mounting Tips Please : ) By: Muzikal-JRNE on Mon, 21 March 2011 15:39

Previous Topic:	My 4pi Build Report
Next Topic:	subwoofers to augment my mains (4pis)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 00:07:45 CST 2024