AudioRoundTable.com: Pi Speakers » 2226j (16 ohm) usable?

Home » Sponsored » Pi Speakers » 2226j (16 ohm) usable? (question about 4pi)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 2226j (16 ohm) usable? [message #66377 is a reply to message #66376]

Sun, 27 February 2011 23:46

Wayne Parham
Messages: 18722
Registered: January 2001

Illuminati (33rd Degree)

Yes, there was a JBL "tent sale" some years back where lots of people bought JBL 2226J woofers. They're good parts, and you can use them. But they aren't drop-in replacements and the design hasn't been tested with them. Most times, people just scaled the low-pass values and let it go at that.

Report message to a moderator

[Message index]

		2226j (16 ohm) usable? By: vectordirector on Sun, 27 February 2011 17:30
		Re: 2226j (16 ohm) usable? By: Wayne Parham on Sun, 27 February 2011 21:35
		Re: 2226j (16 ohm) usable? By: vectordirector on Sun, 27 February 2011 22:33
		Re: 2226j (16 ohm) usable? By: Wayne Parham on Sun, 27 February 2011 23:46
		Re: 2226j (16 ohm) usable? By: vectordirector on Mon, 28 February 2011 00:14
		three π / four π By: Wayne Parham on Mon, 28 February 2011 10:08
		Re: 2226j (16 ohm) usable? How about this approach, Wayne? By: ohiogaucho on Mon, 28 February 2011 13:27
		Re: 2226j (16 ohm) usable? How about this approach, Wayne? By: Wayne Parham on Tue, 01 March 2011 08:07
		Re: 2226j (16 ohm) usable? By: Bill Epstein on Sun, 06 March 2011 08:31
		Re: 2226j (16 ohm) usable? By: Adveser on Sun, 06 March 2011 13:21
		Re: 2226j (16 ohm) usable? By: Wayne Parham on Sun, 06 March 2011 22:06

Previous Topic:	Tweeter Change (again !)
Next Topic:	Four Pi R3 Mounting

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 09 18:20:13 CDT 2024