AudioRoundTable.com: Pi Speakers » Port length for 2pi studio

Home » Sponsored » Pi Speakers » Port length for 2pi studio

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Port length for 2pi studio [message #65823]

Mon, 24 January 2011 12:42

justphil
Messages: 114
Registered: December 2010

Viscount

I'm at work and away from my plans. I found a VERY sturdy 2" cardboard roll for my port. I was hoping to cut it and install it tonight but don't have the sizing. I feel pretty confident it was 1 7/8 but wanted to make sure.
Thanks,
Phil

Report message to a moderator

[Message index]

		Port length for 2pi studio By: justphil on Mon, 24 January 2011 12:42
		Re: Port material for 2pi studio By: Wayne Parham on Mon, 24 January 2011 13:29
		Re: Port material for 2pi studio By: justphil on Mon, 24 January 2011 13:33
		Re: Port material for 2pi studio By: Wayne Parham on Mon, 24 January 2011 16:05

Previous Topic:	Interested in spikes?
Next Topic:	Cure for brightness

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Aug 04 04:41:08 CDT 2024