AudioRoundTable.com: Pi Speakers » 4 pi plans, please

Home » Sponsored » Pi Speakers » 4 pi plans, please

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4 pi with alternate compression drivers [message #65809 is a reply to message #65776]

Sun, 23 January 2011 13:44

dryfly_6x
Messages: 3
Registered: January 2011
Location: Colorado Springs

Esquire

Hi Wayne:

been studying the plans /crossover and have a few questions: any need to recess drivers? any strong preference between mdf and baltic birch for cabinets?

I assume from the 3rd order topology that the crossover is something close to a LR4. is this to reduce sensitivity to driver acoustic center offsets? Thanks

Report message to a moderator

[Message index]

		4 pi plans, please By: dryfly_6x on Thu, 20 January 2011 11:05
		Re: 4 pi with alternate compression drivers By: Wayne Parham on Thu, 20 January 2011 11:55
		Re: 4 pi with alternate compression drivers By: dryfly_6x on Thu, 20 January 2011 12:26
		Re: 4 pi with alternate compression drivers By: Wayne Parham on Thu, 20 January 2011 13:27
		Re: 4 pi with alternate compression drivers By: dryfly_6x on Sun, 23 January 2011 13:44
		Re: 4 pi with alternate compression drivers By: Wayne Parham on Sun, 23 January 2011 16:45
		Re: 4 pi with alternate compression drivers By: tom-m on Sun, 24 June 2012 16:03
		Re: 4 pi with alternate compression drivers By: Wayne Parham on Sun, 24 June 2012 19:45

Previous Topic:	3 pi sub
Next Topic:	4 Pi Plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 07:20:07 CST 2024