AudioRoundTable.com: Pi Speakers » Thanks Wayne! "4Pi" success.

Home » Sponsored » Pi Speakers » Thanks Wayne! "4Pi" success.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Thanks Wayne! "4Pi" success. [message #63292 is a reply to message #63291]

Wed, 30 June 2010 23:05

doucanoe
Messages: 34
Registered: May 2009

Baron

Long story but these cabs originally housed a Altec 15" woofer and 811 horns. After a "bit" of modification, they now have a 3 cu-ft sub enclosure for the 2226's and are tuned to 38. The rear porting was not the plan originally, but came about because of lack of room to allow for it on the front. I guess you would have to view the interior framing to see what I'm getting at. They are about 5 cu-ft internal volume overall. The pics of the crossovers I built for them were taken prior to final changes.

RC

Attachment: JBL2226H 18sound XT1086 B&C DE25 037 (816 x 612).jpg
(Size: 102.77KB, Downloaded 1308 times)
Attachment: JBL2226H 18sound XT1086 B&C DE25 040 (612 x 816).jpg
(Size: 111.28KB, Downloaded 1047 times)
Attachment: JBL2226H 18sound XT1086 B&C DE25 045 (750 x 562).jpg
(Size: 78.49KB, Downloaded 989 times)
Attachment: JBL2226H 18sound XT1086 B&C DE25 031 (816 x 612).jpg
(Size: 114.33KB, Downloaded 1018 times)

Report message to a moderator

[Message index]

		Thanks Wayne! "4Pi" success. By: doucanoe on Wed, 30 June 2010 15:04
		Re: Thanks Wayne! "4Pi" success. By: Wayne Parham on Wed, 30 June 2010 21:40
		Re: Thanks Wayne! "4Pi" success. By: doucanoe on Wed, 30 June 2010 23:05
		Re: Thanks Wayne! "4Pi" success. By: Psychoacoustic on Wed, 30 June 2010 23:53
		Re: Thanks Wayne! "4Pi" success. By: doucanoe on Thu, 01 July 2010 07:46
		Re: Thanks Wayne! "4Pi" success. By: Wayne Parham on Thu, 01 July 2010 09:51
		Re: Thanks Wayne! "4Pi" success. By: doucanoe on Thu, 01 July 2010 11:15
		Re: Thanks Wayne! "4Pi" success. By: Wayne Parham on Thu, 01 July 2010 18:08
		Re: Thanks Wayne! "4Pi" success. By: doucanoe on Thu, 01 July 2010 20:23
		Crossover optimization for DI-matched two-way speakers, revisited By: Wayne Parham on Fri, 02 July 2010 15:02
		Re: Crossover optimization for DI-matched two-way speakers, revisited By: doucanoe on Sat, 03 July 2010 07:04
		Re: Crossover optimization for DI-matched two-way speakers, revisited By: Wayne Parham on Sat, 03 July 2010 08:25
		Re: Crossover optimization for DI-matched two-way speakers, revisited By: doucanoe on Sat, 03 July 2010 09:17

Previous Topic:	Upon further investigation..
Next Topic:	4Pi speaker plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 07:55:07 CST 2024