AudioRoundTable.com: Pi Speakers » 4pi with altec 807?

Home » Sponsored » Pi Speakers » 4pi with altec 807?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4pi with altec 807? [message #63167 is a reply to message #63163]

Tue, 15 June 2010 01:22

geezer
Messages: 5
Registered: June 2010

Esquire

Of course your right, its a 811 horn I meant. I might want to try a build with these components inspite the big crossover issues. I have the Minidsp which is an active crossover that I can fool around with, and if the results don´t end up satisfing I could always get back to the orginal 4pi design.

As you said it would be a totally different speaker but I wonder if you have any particular design advise? Considering your experience and knowledge about the jbl 2226 woofer.

My plan was to stick to the same tuning-frequency, port dimension and volume as the 4pi.

Thank you for the fast reply!
/Anders

oh and do you have 4pi-plans?

Regards

Report message to a moderator

[Message index]

		4pi with altec 807? By: geezer on Mon, 14 June 2010 16:47
		Re: 4pi with altec 807? By: Wayne Parham on Mon, 14 June 2010 20:16
		Re: 4pi with altec 807? By: geezer on Tue, 15 June 2010 01:22
		Re: 4pi with altec 807? By: Wayne Parham on Tue, 15 June 2010 01:39
		Re: 4pi with altec 807? By: geezer on Tue, 15 June 2010 01:53
		Re: 4pi with altec 807? By: Bill Epstein on Tue, 15 June 2010 14:10
		Re: 4pi with altec 807? By: geezer on Wed, 16 June 2010 16:12
		Re: 4pi benefits By: Wayne Parham on Wed, 16 June 2010 18:49
		Altec 811B horn and 807 driver By: spkrman57 on Thu, 17 June 2010 10:41
		Re: Altec 811B horn and 807 driver By: geezer on Thu, 17 June 2010 14:00

Previous Topic:	2pi crossover question and opinion for near-field monitoring
Next Topic:	three π speakers at LSAF 2010

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 16 08:38:04 CDT 2024