Home » Sponsored » Pi Speakers » 3Pi or 4Pi better than modded Klipsch Quartet?
3Pi or 4Pi better than modded Klipsch Quartet? [message #63083] Mon, 07 June 2010 11:21 Go to next message
BvengtSvingarm
Messages: 5
Registered: June 2010
Esquire
Hi,

The Quartets are my first intro into horn drivers and HE. I like what I hear.

Modding them will be close to the cost of the 3-4 Pi speakers and I'm wondering if the Pi speakers will outclass the modded Quartets.

TIA!
Re: 3Pi or 4Pi better than modded Klipsch Quartet? [message #63084 is a reply to message #63083] Mon, 07 June 2010 12:35 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Quality will be largely influenced by the components chosen, i.e. upgrade level. I think either the three π or the four π with upgraded woofer and tweeters will perform much better. Certainly I'm biased but then again I put a lot of effort into perfecting these designs and I've chosen excellent components for the top-level options, so that's a potent combination. It's hard to beat a pair of upgraded three π or four π speakers used with multisubs.

Re: 3Pi or 4Pi? [message #63100 is a reply to message #63084] Tue, 08 June 2010 11:20 Go to previous messageGo to next message
BvengtSvingarm
Messages: 5
Registered: June 2010
Esquire
Thanks Wayne...

Which is beter for a smaller listening room 12x15x8.

The 3 or 4Pi?
Re: 3Pi or 4Pi? [message #63101 is a reply to message #63100] Tue, 08 June 2010 14:37 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Both are good in that size room. Neither is really "better", at least not when fully upgraded. The three π loudspeaker uses a really nice Acoustic Elegance midwoofer (TD12S) and the four π model uses one of JBL's best midwoofers, the 2226H. They're very nice speakers, more similar than different. The four π is 3dB louder though.

Re: 3Pi or 4Pi? [message #63103 is a reply to message #63101] Wed, 09 June 2010 07:28 Go to previous messageGo to next message
BvengtSvingarm
Messages: 5
Registered: June 2010
Esquire
Thanks!

I guess I should have said "appropriate" instead of better. I've settled on the fours because of the cabinet size and more importantly the increased sensitivity. I'm having a lot of fun dinking around with EL84 amps and the fours seem like they would be an interesting match.
Re: 3Pi or 4Pi? [message #63106 is a reply to message #63103] Wed, 09 June 2010 11:06 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Yes, the four π speaker is 3dB louder than the three π, given the same input. That can make a difference for flea-power SET amp owners.

All my tube amps are around ~10 watts and with this much power, either speaker is fine. You can tell the difference, but the three π speaker just needs a little more twist of the volume knob, not much. It is plenty loud, even for home theater.

If you have a lot less power than that, say under ~2.5 watts, then the extra sensitivity of the four π speaker probably becomes more of a consideration. Once you get down to the little 1 watters, they're not really what I'd consider a power amp, more like a headphone amp. At that ultra-low power level, neither speaker will get above a polite conversation level.

Previous Topic: P Audio 2226 copy- opinions?
Next Topic: Heresy Box for 3Pi
Goto Forum:
  


Current Time: Thu Nov 21 18:33:13 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest