AudioRoundTable.com: Source

Home » Audio » Source » Pioneer RT-909 (Speed Problem 7.5 Only)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Pioneer RT-909 [message #61691]

Fri, 08 January 2010 13:25

timestar
Messages: 4
Registered: January 2010
Location: NC

Esquire

I have a RT-909 with a 7.5 speed problem - way too slow...3.75 is fine, but 7.5 almost runs the same as 3.75. Help anyone? Very Happy

Report message to a moderator

Re: Pioneer RT-909 [message #61693 is a reply to message #61691]

Fri, 08 January 2010 13:36

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

Mine did that too. It was a two-fold problem for me: The pinch roller was gummy and needed to be replaced. Check that - it's pretty common - If the roller feels tacky to the touch, it must be replaced. However, mine also needed an adjustment. I was lucky though - I'm told that the motors are fairly common failure modes and I'm not sure you can get those anymore. Do a search here for "Pioneer" because there are lots of posts about this unit.

Report message to a moderator

Re: Pioneer RT-909 [message #61694 is a reply to message #61693]

Fri, 08 January 2010 13:59

timestar
Messages: 4
Registered: January 2010
Location: NC

Esquire

Thanks, Wayne. I'll check the pinch rollers, but I think they are new. What kind of adjustment did yours need? I'm told by local repair that it is probably a problem on the DC board at a cost of $250.
Robert

Report message to a moderator