AudioRoundTable.com: Speaker » Wardsweb DIY horns

Home » Audio » Speaker » Wardsweb DIY horns (If you can't find it, build it.)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Wardsweb DIY horns [message #61491 is a reply to message #61490]

Tue, 01 December 2009 15:32

wardsweb
Messages: 45
Registered: May 2009

Baron

Depending on your wood or veneer you may want to use a sanding sealer first. It will keep you from having to use so many coats to just fill the grain of the wood. A high gloss (piano) requires a glass like surface without voids or waves. Once it is sanded to 1000 grit you then polish it with something like 3M Perfect It. Its like buffing out an automotive finish.

Report message to a moderator

[Message index]

		Wardsweb DIY horns By: wardsweb on Mon, 30 November 2009 22:55
		Re: Wardsweb DIY horns By: Wayne Parham on Tue, 01 December 2009 10:13
		Re: Wardsweb DIY horns By: wardsweb on Tue, 01 December 2009 11:29
		Re: Wardsweb DIY horns By: Wayne Parham on Tue, 01 December 2009 12:41
		Re: Wardsweb DIY horns By: wardsweb on Tue, 01 December 2009 15:32
		Re: Wardsweb DIY horns By: Wayne Parham on Tue, 01 December 2009 19:07

Previous Topic:	PROJECT: 200 to 900 Hz -- a successful solution
Next Topic:	What Exactly Is A Waveguide?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 09:45:00 CST 2024