AudioFred Messages: 377 Registered: May 2009 Location: Houston
Illuminati (1st Degree)
I've ordered the Parts Express 200 tweeter buyout, and I'm planning to build a pair of line arrays, each with 100 of these drivers running full range above 200hz. I plan to boost the response from 200hz to about 3khz. I'll use a subwoofer below 200hz. I know somebody will tell me this isn't going to work, but I checked Dr Griffin's line array bible, and it says the ctc spacing is ok.
Wayne Parham Messages: 18783 Registered: January 2001
Illuminati (33rd Degree)
Just out of curiosity, why did you choose to post this in the Dungeon? Wanna keep the budget projects outta your neighborhood and leave 'em in the slums?
AudioFred Messages: 377 Registered: May 2009 Location: Houston
Illuminati (1st Degree)
Wayne Parham wrote on Wed, 14 October 2009 20:19
Just out of curiosity, why did you choose to post this in the Dungeon? Wanna keep the budget projects outta your neighborhood and leave 'em in the slums?
No, I positioned it in the dungeon because it's a ridiculous design, but one that I saw on another forum. Running tweeters with a 4.2khz Fs down to 200hz with a bass boost might produce a bit of distortion. There seem to be more impractical designs for line arrays than for any other type of speaker. I know because I've done some myself.
Also because this forum has been dormant too long, and I don't have any good Nobama jokes.
colinhester Messages: 1349 Registered: May 2009 Location: NE Arkansas
Illuminati (3rd Degree)
Man, that just ain't right. Wiring that monster is going to be a bitch. Hope you don't get one out of phase. Seriously....good luck. It's sounds like a fun project.....C
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
