AudioRoundTable.com: Speaker » Basic requirements for phase plug in horn loaded cone driver?

Home » Audio » Speaker » Basic requirements for phase plug in horn loaded cone driver?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

EAW implemented it in their Midbass horn. [message #60620 is a reply to message #19587]

Tue, 18 August 2009 01:49

noviygera
Messages: 23
Registered: June 2009
Location: United States

Chancellor

The model is MR102L. Do a search.
They claim (and I believe them) that a mid horn that has a 12" driver can be used 200hz to 1.2kHz with the help of a phase plug. Otherwise it would only go up to 900Hz or 1K.
That means it's useful above 900Hz on a 12" driver.

-Herman

Report message to a moderator

[Message index]

		Basic requirements for phase plug in horn loaded cone driver? By: Norris Wilson on Fri, 28 November 2008 15:58
		Re: Basic requirements for phase plug in horn loaded cone driver? By: JLH on Mon, 01 December 2008 11:32
		Re: Basic requirements for phase plug in horn loaded cone driver? By: Norris Wilson on Mon, 01 December 2008 18:03
		Re: Basic requirements for phase plug in horn loaded cone driver? By: JLH on Tue, 02 December 2008 17:49
		Re: Basic requirements for phase plug in horn loaded cone driver? By: Wayne Parham on Tue, 02 December 2008 20:20
		Thanks JLH and Wayne, very enlightning (nt) By: Norris Wilson on Wed, 03 December 2008 00:49
		EAW implemented it in their Midbass horn. By: noviygera on Tue, 18 August 2009 01:49

Previous Topic:	Audio Note AN-K - Changing internal wiring from silver to copper
Next Topic:	using a wall of 15" woofers for bass.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 23:43:48 CST 2024